Required Tools Time Required: 20 minutes Run Under-Cabinet Extension Cable TURN OFF YOUR GAME – Always turn off the game when plugging or unplugging anything into your control box. Open the speaker panel by inserting the back-box key and turning it. Lower the speaker panel down into the position shown above. Locate this wire clip. […]
Under-Cabinet Kit 8 Install Instructions Read More »
Check Your Speaker 86 Version Required Tools Time Required: 15-30 minutes Speaker Frame Install Overview [Insert Awesome Diagram Here] Our advanced speaker kit fits between your back-box panel and the metal speaker panel and becomes the new LCD display mount. During the following instructions, you will remove the speaker panels one at a time and
Spike 2 Speaker Frame – Crystal 86 Square LED Install Instructions Read More »
Required Tools Time: 5 mins About Control Box R4.0 Does your control box not look like the above? Then you might have a different revision control box. Go back to our instructions page and find install instructions for your particular box. Control Box Packaging Locate your control box package and open it up. Inside you
Spike 2 Advanced Control Box R4.0 Install Instructions Read More »
Required Tools Time: 5 mins Control Box Install TURN OFF YOUR GAME – Game should always be turned off when connecting or disconnecting the control box. Open the speaker panel by inserting the back-box key and turning it. Lower the speaker panel down into the position shown above. Power Install Locate your Spike 2 CN6
Spike 2 Advanced Control Box R3.0 Install Instructions Read More »
Required Tools Time: 15 mins Preparation TURN THE GAME OFF – Do not attempt to install this kit with the game powered on. Remove the glass from the game. Remove all the balls from the game and lift the playfield into the service position. See the game manual if you are unsure how to do
Interactive Kit – Iron Maiden Install Read More »
Required Tools No tools required. Time: 5 mins Remove the wire from the plugs on the power splitter. Plug one end of the wire into the CN6 connector on the backbox. Plug the second end on the far right plug on the power splitter. Stick the power splitter to the backbox where it is the
Spike 2 CN6 Power Splitter Install Read More »
Required Tools No tools required. Time: 5 mins Power Module Install TURN OFF YOUR GAME – Game must Always be turned off prior to connecting or disconnecting the power module. Open the speaker panel by inserting the back-box key and turning it. Lower the speaker panel down into the position shown above. Locate your Spike
Spike 2 CN6 Power Module Install R2 Read More »
Required Tools Time Required: 10 minutes NOTE: We now include two extension cables in our advanced under cabinet kit. This allows you to place a single bar behind the head if you would like to to allow patterns to be displayed behind the game. You must connect all the bars together and into the U
Under-Cabinet Kit 4 Install Instructions Read More »
Required Tools No tools required. Time: 5 mins Speaker Insert Install Take your speaker frames out of the package. Place the left frame on the left side and the right frame on the right side. Flip the speaker frames upside down so the wires are coming out of the top of the frames. The right
Godzilla Speaker Inserts Install Instructions Read More »
Required Tools Time: 5 mins Control Box Install TURN OFF YOUR GAME – Game should always be turned off when connecting or disconnecting the control box. Open the speaker panel by inserting the back-box key and turning it. Lower the speaker panel down into the position shown above. Power Module Install Locate your Spike 2
Spike 2 Advanced Control Box R1.4 / R1.5 Install Instructions Read More »
